Journal Title：Iet Computers And Digital Techniques

IET Computers & Digital Techniques publishes technical papers describing recent research and development work in all aspects of digital system-on-chip design and test of electronic and embedded systems, including the development of design automation tools (methodologies, algorithms and architectures). Papers based on the problems associated with the scaling down of CMOS technology are particularly welcome. It is aimed at researchers, engineers and educators in the fields of computer and digital systems design and test.

The key subject areas of interest are:

Design Methods and Tools: CAD/EDA tools, hardware description languages, high-level and architectural synthesis, hardware/software co-design, platform-based design, 3D stacking and circuit design, system on-chip architectures and IP cores, embedded systems, logic synthesis, low-power design and power optimisation.

Simulation, Test and Validation: electrical and timing simulation, simulation based verification, hardware/software co-simulation and validation, mixed-domain technology modelling and simulation, post-silicon validation, power analysis and estimation, interconnect modelling and signal integrity analysis, hardware trust and security, design-for-testability, embedded core testing, system-on-chip testing, on-line testing, automatic test generation and delay testing, low-power testing, reliability, fault modelling and fault tolerance.

Processor and System Architectures: many-core systems, general-purpose and application specific processors, computational arithmetic for DSP applications, arithmetic and logic units, cache memories, memory management, co-processors and accelerators, systems and networks on chip, embedded cores, platforms, multiprocessors, distributed systems, communication protocols and low-power issues.

Configurable Computing: embedded cores, FPGAs, rapid prototyping, adaptive computing, evolvable and statically and dynamically reconfigurable and reprogrammable systems, reconfigurable hardware.

Design for variability, power and aging: design methods for variability, power and aging aware design, memories, FPGAs, IP components, 3D stacking, energy harvesting.

Case Studies: emerging applications, applications in industrial designs, and design frameworks.

IET 計算機與數字技術發表技術論文，介紹數字片上系統設計和電子及嵌入式系統測試各個方面的最新研究和開發工作，包括設計自動化工具（方法、算法和架構）的開發。特別歡迎基于與 CMOS 技術縮小相關的問題的論文。它面向計算機和數字系統設計和測試領域的研究人員、工程師和教育工作者。

感興趣的關鍵主題領域是：

設計方法和工具：CAD/EDA 工具、硬件描述語言、高級和架構綜合、硬件/軟件協同設計、基于平臺的設計、3D 堆疊和電路設計、片上系統架構和 IP 核、嵌入式系統、邏輯綜合、低功耗設計和功率優化。

仿真、測試和驗證：電氣和時序仿真、基于仿真的驗證、硬件/軟件協同仿真和驗證、混合域技術建模和仿真、硅后驗證、功率分析和估算、互連建模和信號完整性分析、硬件信任和安全性、可測試性設計、嵌入式核心測試、片上系統測試、在線測試、自動測試生成和延遲測試、低功耗測試、可靠性、故障建模和容錯。

處理器和系統架構：多核系統、通用和專用處理器、DSP 應用的計算算法、算術和邏輯單元、高速緩存、內存管理、協處理器和加速器、片上系統和網絡、嵌入式內核、平臺、多處理器、分布式系統、通信協議和低功耗問題。

可配置計算：嵌入式內核、FPGA、快速原型設計、自適應計算、可演化和靜態和動態可重構及可重新編程系統、可重構硬件。

針對可變性、功耗和老化的設計：針對可變性、功耗和老化感知設計、內存、FPGA、IP 組件、3D 堆疊、能量收集的設計方法。

案例研究：新興應用、工業設計中的應用以及設計框架。

Iet Computers And Digital Techniques創刊于2007年，由Wiley出版商出版，收稿方向涵蓋工程技術 - 計算機：理論方法全領域，此期刊水平偏中等偏靠后，在所屬細分領域中專業影響力一般，過審相對較易，如果您文章質量佳，選擇此期刊，發表機率較高。平均審稿速度 12周，或約稿 ，影響因子指數1.1，該期刊近期沒有被列入國際期刊預警名單，廣大學者值得一試。